Larry H. Miller Ford Mesa

Ford Flex ABS and Brake Light

Ford Flex ABS and Brake Light service at Larry H. Miller Ford Mesa in Mesa, AZ

Frequently asked questions
2018 Ford Flex Sel shown

On a Ford Flex, an amber ABS light means the anti-lock system has switched itself off, while a red brake light can signal an applied parking brake, low brake fluid, or a hydraulic fault.

For drivers in Mesa, Larry H. Miller Ford Mesa provides ABS and brake light diagnosis for the Ford Flex across all model years. The inspection helps identify whether the warning relates to a wheel-speed sensor, its wiring or tone ring, brake fluid, brake pad wear, the parking brake switch, or another hydraulic concern named by the vehicle’s warning system. Because the two lights indicate different conditions, prompt attention can clarify whether normal braking remains available or whether the vehicle should not be driven. The service visit is designed to trace the warning rather than guess at its cause.

What the ABS and brake lights mean on a Ford Flex

An amber ABS light that remains on after the Ford Flex starts means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault. Normal braking remains, but the wheels can lock during a hard stop. A red BRAKE light, or a circle with an exclamation point, that stays on with the parking brake released can mean low brake fluid or a hydraulic system fault; it can also indicate that the parking brake is applied. Low fluid usually points to worn pads or a leak. A soft pedal, a pedal that travels farther than usual, both lights illuminated, or a red light with a soft pedal means the vehicle should not be driven.

What the diagnosis covers at Larry H. Miller Ford Mesa

The diagnosis begins with a scan of the anti-lock brake module for stored trouble codes. The inspection also tests the wheel-speed sensors, their wiring, and the tone rings that support the system’s readings. Brake fluid level and condition are checked along with brake pad wear and the parking brake switch. This process helps connect the warning to a sensor, fluid condition, worn pads, a leak, the parking brake switch, or the hydraulic system instead of relying on guesswork. Drivers can schedule service with Larry H. Miller Ford Mesa for an ABS and brake system inspection.

Recalls on the Ford Flex

NHTSA campaign 15V464000 covers the 2015 Ford Flex and involves the parking brake, which may not fully engage. If the transmission is left in a gear other than Park on a slope, the vehicle may roll away, increasing crash risk. Larry H. Miller Ford Mesa checks open recalls by VIN and performs an applicable recall remedy at no charge to the owner.

Booking at Larry H. Miller Ford Mesa

An appointment includes an anti-lock module scan and inspection of the brake system, including sensors, wiring, tone rings, fluid, pads, and the parking brake switch. Drivers can schedule service online or contact Larry H. Miller Ford Mesa at 480-690-1279. The dealership is located at 460 East Auto Center Drive, Mesa, AZ 85204.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on a Ford Flex?The amber ABS light means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault.

Normal braking remains, but the wheels can lock during a hard stop. An inspection can test the sensors, wiring, and tone rings and scan the anti-lock module.

What is the difference between the amber ABS light and red brake light?The amber ABS light concerns the anti-lock system, while the red brake light can indicate an applied parking brake, low fluid, or a hydraulic fault.

Low brake fluid usually points to worn pads or a leak. Both lights together, or a red light with a soft pedal, means the vehicle should not be driven.

Is it safe to drive with the ABS light on?With only the ABS light on, normal braking remains, but the wheels can lock in a hard stop.

The vehicle should not be driven when both lights are on or when the red brake light is accompanied by a soft pedal. An inspection can determine what triggered the warning.

What usually causes the ABS and brake lights?The named causes include a wheel-speed sensor fault, low brake fluid, worn pads, a leak, an applied parking brake, or a hydraulic system fault.

The diagnosis checks the anti-lock module, sensors, wiring, tone rings, fluid, pads, and parking brake switch. These checks help trace the warning to the relevant brake-system component.

How do I book ABS and brake light service at Larry H. Miller Ford Mesa?Drivers can schedule service online or call Larry H. Miller Ford Mesa at 480-690-1279.

The visit includes an anti-lock module scan and brake-system inspection. Larry H. Miller Ford Mesa is at 460 East Auto Center Drive, Mesa, AZ 85204.