2019 Ford F-150 Oil Change in Mesa, AZ

The typical dealer-performed 2019 Ford F-150 oil change at Larry H. Miller Ford Mesa ranges from $69 to $119 depending on oil type and filter.

Pricing reflects OEM-spec oil and a Motorcraft filter for the 3.3L V6, plus a multi-point inspection and proper disposal. Exact cost varies by synthetic blend vs. full synthetic and any add-on services you approve. We post up-front pricing and current offers online for Mesa, AZ drivers.

• Includes OEM-spec oil and Motorcraft filter
• Multi-point inspection and fluid top-offs included
• See service specials: service specials

An oil change for a 2019 Ford F-150 typically takes 45–60 minutes at our Mesa dealership.

This window covers write-up, the service itself, a road-ready multi-point inspection, and checkout. Plan a little extra time during peak hours or if you add tire rotation or diagnostics. Booking ahead helps us keep you on schedule.

• Most appointments completed within one hour
• Add 15–20 minutes if combining services
• Book online: schedule service

Under normal driving, change the 2019 Ford F-150’s oil about every 7,500 miles; in Arizona’s heat, dust, towing, or short trips, service closer to 5,000 miles.

Ford’s oil life monitor is a good guide, but local conditions in Mesa—high temps, desert dust, and stop‑and‑go traffic—qualify as severe duty. Shortening the interval protects the 3.3L V6 and helps maintain warranty coverage when you keep records.

• Normal service: ~7,500-mile interval
• Severe duty (AZ heat/dust/towing): ~5,000 miles
• Follow the oil life monitor and document each service

The 2019 Ford F-150 3.3L V6 uses SAE 5W‑20 meeting Ford WSS‑M2C945‑A, typically a Motorcraft synthetic blend or equivalent full synthetic.

This viscosity flows quickly at startup and provides protection under Arizona heat. We stock OEM-spec Motorcraft oil and filters to match Ford’s requirements and maintain performance, emissions, and warranty compliance.

• Viscosity: SAE 5W‑20 per Ford spec
• Meets Ford WSS‑M2C945‑A
• Motorcraft synthetic blend or full synthetic available

The 2019 Ford F-150 3.3L V6 needs approximately 6.0 quarts of oil with a filter change.

We measure precisely and verify level after the engine circulates oil to ensure proper fill. Using the correct capacity prevents aeration, oil starvation, and drivability issues. Your service report will note the quantity used and the exact oil specification.

• Approximate capacity: 6.0 quarts with filter
• Documented on your repair order for records
• Correct level verified warm after fill

Yes—dealer oil changes at Larry H. Miller Ford Mesa use OEM-spec oil and a Motorcraft filter and include a multi-point inspection and service record for warranty.

Quick-lube shops can be cheaper for conventional oil, but they may not always use fluids that meet Ford specs. Our certified techs service F-150 trucks daily and check for TSBs, recalls, and wear patterns common in Arizona.

• OEM-spec oil and Motorcraft filter used
• Multi-point inspection and fluid top-offs included
• Service records support warranty coverage

Skipping required oil changes can jeopardize powertrain warranty claims if maintenance isn’t performed on schedule and documented.

Ford requires following the maintenance schedule and keeping receipts or repair orders. Warranty work typically requires a certified facility, and proof of correct-spec oil and filter helps protect your coverage.

• Keep dated service records and mileage
• Use oil that meets Ford WSS‑M2C945‑A
• Schedule with a certified dealer for warranty work

Ford specifies 5W‑20 meeting WSS‑M2C945‑A; Motorcraft synthetic blend meets spec, while full synthetic can improve high-heat stability and oxidation resistance.

Conventional oil doesn’t meet many late-model requirements. Synthetic blend balances cost and protection and is Ford’s typical fill; full synthetic offers better thermal stability—useful in Mesa’s summer heat and towing.

• OEM spec: 5W‑20, WSS‑M2C945‑A
• Synthetic blend = OEM-standard protection
• Full synthetic = added high-temp margin

We support the Phoenix metro from our Mesa location—convenient to Gilbert, Chandler, Tempe, and Scottsdale—with oil service tailored for Arizona driving. High heat, dust, frequent short trips, and towing all accelerate oil degradation and filter loading in the 2019 Ford F-150. Our OEM-certified technicians service F-150 trucks daily and apply Ford procedures to protect the 3.3L V6. You can book ahead, view service specials, and arrive at 460 E Auto Center Dr, Mesa, AZ 85204 for quick check-in. For directions or questions, use our online tools or schedule service now.

Every oil service includes a drain and fill with Ford-spec 5W‑20 engine oil, replacement of the Motorcraft oil filter, and proper torque of the drain plug with a fresh gasket when applicable. We complete a multi‑point inspection, check and top off under‑hood fluids, set tire pressures to spec, and reset the oil life monitor. You’ll receive a detailed repair order documenting mileage, oil viscosity, Ford approval spec, and filter used—records that help defend warranty claims. Prefer contactless drop-off or a specific time slot? Reserve it when you schedule service online, and don’t forget to check current service specials before you arrive.

Viscosity: SAE 5W‑20 meeting Ford WSS‑M2C945‑A is specified for the 2019 Ford F-150 3.3L V6. Capacity is approximately 6.0 quarts with filter. Ford’s normal oil-change interval is roughly 7,500 miles, but severe-duty Arizona use—high heat, dusty roads, towing, or frequent short trips—calls for shorter intervals around 5,000 miles or as indicated by the oil life monitor. We install a Motorcraft filter designed for the F-150’s flow and filtration targets to protect timing components and bearings. If any Ford TSBs apply to your VIN, our team will advise you at check‑in. Bring your 2019 Ford F-150 to Larry H. Miller Ford Mesa in Mesa for an OEM-spec oil change — schedule service.