Larry H. Miller Ford Mesa

2017 Ford Explorer Brake Pads

Ford Explorer Brake Pads service at Larry H. Miller Ford Mesa in Mesa, AZ

Frequently asked questions

The 2017 Ford Explorer is a midsize SUV that relies on properly functioning brakes for daily Mesa driving, family trips and towing. At Larry H. Miller Ford Mesa, brake pad service begins by measuring the pad material remaining at all four corners, then replacing worn pads with components matched to the vehicle’s braking system. The service also includes inspection of the rotors, calipers, related hardware and brake fluid condition. Squealing, scraping, grinding, increased pedal travel or longer stopping distances are reasons to arrange an inspection. Booking brake service helps identify whether the pads need replacement now or can remain in service until the next visit.

What a brake pad replacement on a 2017 Ford Explorer involves

Brake pad service on a 2017 Ford Explorer starts with measuring the remaining pad material at all four corners. Checking each wheel provides a clearer picture of brake wear across the vehicle instead of relying on a sound or pedal sensation alone. When replacement is appropriate, the worn pads are removed and new pads matched to the vehicle’s braking system are installed. The service does not stop at the pads: the rotors, calipers, associated hardware and brake fluid condition are inspected as part of the same brake-system review.

This approach helps identify conditions that could affect the performance or service life of the replacement pads. A technician can explain what the measurements and inspection show, including whether service is needed now or can wait until the next visit. If your Explorer is producing brake noise or stopping differently, schedule service at Larry H. Miller Ford Mesa for a brake inspection and pad assessment.

Why brake pad wear matters on a 2017 Ford Explorer

Brake pads are designed to wear, but continuing to drive after the friction material is gone can turn routine pad service into rotor damage. A grinding sound is especially important because it means the backing plate is contacting the rotor. The 2017 Ford Explorer is an SUV with a curb-weight range of 4,443 to 4,901 pounds, so its brake system manages substantial vehicle mass during normal stops. It is also rated to tow up to 5,000 pounds, which asks more of the same braking system when a trailer and added load are involved.

Pay attention to squealing or scraping, longer pedal travel and a vehicle that takes longer to stop. These signs do not identify the exact condition by themselves, which is why pads, rotors, calipers, hardware and fluid should be assessed together. Measuring the pads at all four corners gives a direct basis for deciding whether replacement is needed.

Brake service at Larry H. Miller Ford Mesa

Larry H. Miller Ford Mesa provides brake pad inspection and replacement for drivers of the 2017 Ford Explorer in Mesa, Arizona. The service covers measurement of the remaining pad material on all four corners, replacement with pads matched to the braking system and inspection of the rotors, calipers, hardware and brake fluid condition. That combination addresses the parts that work together whenever the Explorer slows or stops.

Booking also gives you a clear answer about the condition of the pads: replacement may be appropriate now, or the measurements may support waiting until the next visit. If you hear grinding, stop driving and arrange brake service rather than continuing to use the vehicle. Visit Larry H. Miller Ford Mesa at 460 East Auto Center Drive, Mesa, AZ 85204, or call 480-690-1279. You can also review service specials before booking.

Frequently Asked Questions

6 common questions answered

What are the signs a 2017 Ford Explorer needs new brake pads?Squealing or scraping, grinding, longer pedal travel and longer stopping distances can indicate that a 2017 Ford Explorer needs brake pad service.

Grinding means the friction material is gone and the backing plate is contacting the rotor, so stop driving and book an inspection. A measurement at all four corners confirms the remaining pad material.

  • Squeal or scrape during braking
  • Grinding noise from the brakes
  • Longer pedal travel or stopping distance
What is included in a brake pad replacement on a 2017 Ford Explorer?Brake pad replacement on a 2017 Ford Explorer includes measuring pad material on all four corners, installing matched pads and inspecting the related brake components.

The inspection includes rotors, calipers, hardware and brake fluid condition. Assessing the system together helps identify issues that could shorten the life of the replacement pads.

  • Four-corner pad-material measurement
  • Replacement pads matched to the braking system
  • Inspection of rotors, calipers, hardware and fluid
How long do brake pads last on a 2017 Ford Explorer?Brake pad life on a 2017 Ford Explorer is determined by how the vehicle is driven, and measurement during inspection provides the useful answer.

City traffic, towing, hills and hard stops can shorten pad life. Because wear varies, the remaining material should be measured at all four corners instead of relying on a mileage assumption.

  • City driving creates frequent brake applications
  • Towing and hills ask more of the brake system
  • Inspection measures the condition directly
Do the rotors have to be replaced when the pads are replaced on a 2017 Ford Explorer?Rotor replacement on a 2017 Ford Explorer depends on the rotor condition found during the brake inspection.

Rotors, pads, calipers, hardware and brake fluid are assessed as a system. Replacing pads while ignoring a rotor or related issue can shorten the life of the new parts, so the inspection determines the appropriate service.

  • Rotors are inspected with the pads
  • Calipers and hardware are checked together
  • Brake fluid condition is part of the review
Is it safe to keep driving a 2017 Ford Explorer with worn brake pads?Driving with worn brake pads is not safe when braking performance has changed, especially if the 2017 Ford Explorer produces a grinding sound.

Grinding means the friction material is gone and the backing plate is on the rotor. Stop driving and book brake service; squealing, scraping, longer pedal travel or longer stopping also call for prompt inspection.

  • Stop driving if grinding is present
  • Arrange inspection for changed stopping behavior
  • Have all four corners measured
How do I book brake service at Larry H. Miller Ford Mesa?You can schedule appointment online with Larry H. Miller Ford Mesa in Mesa or call 480-690-1279.

Booking brake service gets the remaining pad material measured on all four corners and the related components inspected. You can review service specials before arranging your visit.

  • Schedule online through the service appointment page
  • Call 480-690-1279 for Larry H. Miller Ford Mesa
  • Visit 460 East Auto Center Drive, Mesa, AZ 85204