Larry H. Miller Ford Mesa

2013 Ford Flex Coolant

Ford Coolant service at Larry H. Miller Ford Mesa in Mesa, AZ

Frequently asked questions

Frequently Asked Questions

6 common questions answered

What are the signs a 2013 Ford Flex needs a coolant service?Signs include a higher-than-usual temperature gauge, a sweet smell, a puddle, or rusty, cloudy, or low coolant.

These symptoms can reflect depleted coolant, a leak, or another cooling-system concern. Do not open the system while it is hot or under pressure; checks should be performed cold. A service visit can test coolant condition and system pressure.

  • Temperature gauge running higher than usual
  • Sweet smell or puddle beneath the front of the vehicle
  • Rusty, cloudy, or low coolant in the reservoir
What is included in a coolant service on a 2013 Ford Flex?Service includes draining and refilling the coolant, pressure-testing the system, and inspecting key cooling-system components.

The refill uses the type and concentration the manufacturer specifies for this vehicle. Inspection covers the hoses, cap, radiator, and water pump area. These steps help separate routine service from a leak requiring repair.

  • Drain and refill with manufacturer-specified coolant
  • Cooling-system pressure test for leaks
  • Inspection of hoses, cap, radiator, and water pump area
How often should the coolant in a 2013 Ford Flex be changed?The manufacturer's published maintenance schedule settles when coolant should be changed for a 2013 Ford Flex.

That schedule is the reference for replacement timing rather than appearance alone. Coolant condition can also be tested during a service visit between those points. A test helps determine whether the fluid's protective additives remain effective and whether the system is holding pressure.

  • Follow the manufacturer's maintenance schedule
  • Have coolant condition tested between scheduled points
  • Pressure-test the system when a leak is suspected
What kind of coolant does a 2013 Ford Flex use?The manufacturer specifies the coolant type for the 2013 Ford Flex, and coolants are not interchangeable.

Colour is not a reliable guide to what is in the bottle, so choosing fluid by appearance can create a compatibility problem. The appropriate type and concentration should be determined according to the manufacturer's specification. A service visit can help verify condition and system integrity.

  • Use the coolant type specified by the manufacturer
  • Do not assume different coolants are interchangeable
  • Do not use colour alone to identify coolant
Can I just top off the coolant in a 2013 Ford Flex?Topping off restores the coolant level but does not restore the additive package or explain why the level dropped.

If the level keeps falling, treat that as a possible leak rather than normal consumption. The system is hot and under pressure after running, so checking it should be done cold. A coolant service and pressure test can identify whether the issue is condition, leakage, or both.

  • Top-off service restores level only
  • Repeated level loss calls for leak inspection
  • Check the cooling system only when cold
How do I book cooling system service at Larry H. Miller Ford Mesa?You can schedule an appointment online or call Larry H. Miller Ford Mesa at 480-690-1279.

The dealership is located at 460 East Auto Center Drive, Mesa, AZ 85204. Booking coolant service includes checking coolant condition and pressure, helping distinguish routine maintenance from a leak that needs repair. You can also review current service specials before booking.

  • Schedule online through the service appointment page
  • Call 480-690-1279 for assistance
  • Visit 460 East Auto Center Drive in Mesa